MDS MX-2104 Specifiche Pagina 174
- Pagina / 243
- Indice
- SEGNALIBRI
Valutato. / 5. Basato su recensioni clienti
Appendix E Configuration Parameters MX-2100/2104 Installation and Operation Manual
E-4 General
Table E-2. Main Link Parameters
Designation Function Values
SPEED Determines the main link rate.
The supported data rates depend on
the main link module type (refer to
the corresponding module
Installation and Operation Manual).
Data rate in kbps:
9.6, 14.4, 19.2, 28.8, 32, 48, 56, 64, 128,
192, 256, 384, 512, 768, 1024, 1536
Default: 64
TIMING Determines the system timing mode.
For the modules KML.1 through
KML.4, also selects the main link
interface type.
KML.1, KML.2, KML.3 and KML.4:
DTE
- DTE timing
DCE - DCE timing
E-DCE - External DCE timing
Default: DTE
KML.5 and KML.6:
INT - Internal timing
LBT - loopback timing
KML.7, KML.8 and KML.F:
INT - Internal timing
LBT - loopback timing
DCE - DCE timing
BUFFER_SIZE Determines the size of the main link
receive buffer used in the DTE and
E-DCE modes (supported by modules
KML.1 through KML.6 only).
This parameter is not displayed when
the main link interface is DCE.
8 - ±8 bits
256 - ±256 bits, recommended for use on
satellite links
Default: 8
INTERFACE Displays the physical interface
selected by means of an adapter
cable for the KML.3 module.
V.35
- V.35 interface
X.21
- X.21 interface
DSR&CTS Determines the handling of the DSR
and CTS signals for the modules
KML.1, KML.2 and KML.3.
When these signals are
logically OFF, the transmit data line
would be held to MARK.
EXT - When DSR and/or CTS signals are
OFF, the transmit data line is held at
MARK.
INT - The states of the external DSR
and/or CTS signals are disregarded; and
both signals are assumed to be
continuously ON (the transmit data is then
not held to MARK when the state of either
external line is OFF)
Default: INT
- MX-2100/2104 1
- MICROWAVE DATA SYSTEMS, INC 3
- FCC-15 User Information 4
- Preface 5
- Conventions 6
- Related Documentation 6
- Quick Start Guide 7
- Contents 9
- Chapter 4 Operation 10
- Chapter 5 Diagnostics 10
- Table of Contents 11
- Table of Contents 12
- List of Figures 13
- List of Tables 14
- Chapter 1 17
- General Information 17
- 1-2 Functional Description 18
- Local MX-2100 Management 20
- Remote MX-2100 Management 20
- Supervision Terminal 21
- 1.2 Physical Description 22
- MX-2100 Rear Panel 23
- MX-2100 Front Panel 24
- MX-2104 Rear Panel 25
- MX-2104 Front Panel 26
- Common Logic Modules 26
- Main Link Modules 26
- Power Supply Modules 27
- I/O Modules 28
- Physical Description 1-13 29
- 1-14 Physical Description 30
- Physical Description 1-15 31
- Basic MX-2100 System 32
- Redundancy (not for MX-2104) 36
- Bypassing Configurations 39
- Location A Location C 41
- Location B 41
- Switch Mode 46
- System Management 48
- In-Band 50
- Out-of-Band 51
- KCL KCL KCL 52
- KCLKCL KCL 52
- System Timing Considerations 54
- A. Leased Line Confi 55
- B. Digital Configuration 55
- Data Channel Clock Modes 61
- Sub Link Timing 63
- 1.4 I/O Module Applications 66
- Chapter 2 71
- Installation 71
- Input Power Requirements 72
- Grounding 72
- Ambient Requirements 73
- 2.3 Equipment Needed 78
- Equipment Needed 2-9 79
- 2-10 Equipment Needed 80
- 2.4 Package Contents 81
- MX-2100 82
- MX-2104 82
- KPS Module 83
- KCL.2 Module 84
- Installing the KCL.2 Module 85
- Table 2-5 90
- Internal MX-2100 Settings 91
- Connections 91
- Initial Configuration 91
- Chapter 3 93
- Configuring MX-2100 93
- Front Panel Menu 94
- Chapter 4, Operation 95
- See Figure 3-2B 96
- See Figure 3-3C 96
- See Module 96
- Manuals in Part II 96
- Only for Data 97
- Channels 97
- Chapter 4 105
- Operation 105
- Command Options 106
- Command Protocol 107
- Index of Commands 108
- See Insert 111
- RTSM-LEAD 112
- E-LEAD DCD 112
- DATAVOICE 112
- 4.4 Operating Instructions 116
- PASSWORD> 118
- KM2100> 118
- KM2104> 118
- TERMINAL ON LINE 118
- Control Session 119
- Ending a Control Session 119
- Front Panel 120
- Normal Indications 121
- Turn Off 122
- Chapter 5 123
- Diagnostics 123
- Special Considerations 124
- Diagnostic Tests 5-3 125
- 5-4 Diagnostic Tests 126
- Diagnostic Tests 5-5 127
- 5-6 Diagnostic Tests 128
- Diagnostic Tests 5-7 129
- Main Link Loops 130
- User or Test 131
- Equipment 131
- 5-10 Diagnostic Tests 132
- I/O Module Loops and Tests 134
- CHANNEL 1 135
- PRBS Transmission 136
- BERT Testing 136
- 5-16 Diagnostic Tests 138
- Appendix A 139
- Connection Data 139
- A.3 MNG Connector 141
- A.4 Alarm Relay Connector 142
- Appendix B 143
- B-2 Alarm Messages 144
- Alarm Messages B-3 145
- B-4 Alarm Messages 146
- Alarm Messages B-5 147
- B-6 Alarm Messages 148
- Alarm Messages B-7 149
- B-8 Alarm Messages 150
- Alarm Messages B-9 151
- Appendix C 159
- SNMP Management 159
- MIB Structure 160
- SNMP Communities 161
- C.3 IP Environment 162
- IP Environment 163
- Automatic IP Traffic Routing 164
- Network B 165
- Network A 165
- Network C 165
- C.4 SNMP Traps 166
- Appendix D 167
- Software Download 167
- Windows-Based Stations 169
- Appendix E 171
- Configuration Parameters 171
- E-2 General 172
- General E-3 173
- E-4 General 174
- General E-5 175
- E-6 General 176
- General E-7 177
- E-8 General 178
- Appendix F 179
- Command Set Description 179
- F.2 Commands 180
- CLR LOOP 181
- CLR MONITOR 182
- CONNECT SWITCH 182
- Purpose 183
- DEF AGENDA 184
- DEF AGENT 185
- F-8 Commands 186
- DEF ALM DEBOUNCE 187
- DEF CALL 187
- DEF CON 190
- Commands F-13 191
- DEF DB FLIP 192
- DEF FRAME 195
- DEF MANAGER LIST 196
- DEF ML CALL 198
- Commands F-21 199
- F-22 Commands 200
- Commands F-23 201
- DEF NAME 202
- DEF NODE 202
- DEF PWD 204
- DEF ROUTE 205
- DEF SYS 207
- Table F-5. System Parameters 208
- DISCONNECT SWITCH 210
- DSP AGENT 211
- DSP ALM 212
- DSP BERT 212
- DSP CH CON 213
- DSP FLIP 214
- DSP HDR TST 215
- DSP MANAGER LIST 215
- DSP KVF5 216
- DSP PBX 216
- DSP KVF6 217
- DSP SIGNALING 218
- DSP SIG 218
- DSP PRBS_INJ 218
- DSP REM AGENT 219
- DSP REV 219
- DSP ST FRAME 220
- Commands F-43 221
- DSP ST ML 222
- Commands F-45 223
- DSP ST SLOT 224
- Commands F-47 225
- DSP ST SYS 226
- Commands F-49 227
- EDIT DB 228
- FLIP ML 229
- INIT DB 230
- LOAD DB 1\2 232
- LOAD IO 232
- ML RECOVERY 234
- MONITOR 234
- REBUILD FRAME 234
- RESET LOC 235
- RESET IO 235
- RESET ML 235
- UPDATE DB 1\2 236
- Downloading Procedure, D-3 241
- Figure 1 243
Prodotti e manuali riguardandi Networking MDS MX-2104
Networking MDS MX-2100 Manuale Utente
(70 pagine)
(70 pagine)
Networking MDS Orbit MCR-4G Specifiche
(146 pagine)
(146 pagine)
Networking MDS Orbit MCR-4G Manuale Utente
(4 pagine)
(4 pagine)
Networking MDS TransNET 900 Manuale Utente
(14 pagine)
(14 pagine)
Whirlpool SMP 778 C/BT/IXL manuali
Manuali dei proprietari e guide per l'utente per Forni Whirlpool SMP 778 C/BT/IXL.
We fornisce 2 manuali pdf Whirlpool SMP 778 C/BT/IXL per scaricare gratuitamente in base al tipo di documento: Guida alla Manutenzione e Cura, Istruzioni per l'uso
Whirlpool SMP 778 C/BT/IXL Guida alla Manutenzione e Cura (16 pagine)
Marchio: Whirlpool | Categoria: Ovens | Dimensione: 6.93 MB |
Indice
Whirlpool SMP 778 C/BT/IXL Istruzioni per l'uso (16 pagine)
Marchio: Whirlpool | Categoria: Ovens | Dimensione: 6.94 MB |
Indice
Più prodotti e manuali per Forni Whirlpool
| Modelli | Tipo di Documento |
|---|---|
| F48 101 GP.1 IX /HA |
Istruzioni per l'uso
   
Whirlpool F48 101 GP.1 IX /HA Instruction for Use,
72 pagine
|
| SMP 654OF/BT/IXL |
Guida alla Manutenzione e Cura
Whirlpool SMP 654OF/BT/IXL Use and care guide [sv] ,
16 pagine
|
| ACM 711/BF |
Istruzioni per l'uso
Whirlpool ACM 711/BF Instruction for Use [bs] [hr] ,
12 pagine
|
| ACM 918/BA |
Istruzioni per l'uso
Whirlpool ACM 918/BA Instruction for Use,
13 pagine
|
| ACM 355/BA/WH |
Istruzioni per l'uso
Whirlpool ACM 849/BA Instruction for Use,
15 pagine
|
| ACM 816/BA |
Istruzioni per l'uso
Whirlpool ACM 816/BA Instruction for Use,
9 pagine
|
| AKS 140/IX/01 |
Istruzioni per l'uso
Whirlpool AKS 140/IX/01 Instruction for Use,
9 pagine
|
| FKQ 831 (K) |
Istruzioni per l'uso
Whirlpool FKQ 831 (K) Instruction for Use,
68 pagine
|
| FZ 657 C.1 IX /HA |
Istruzioni per l'uso
Whirlpool F 627 C.1 IX /HA Instruction for Use,
72 pagine
|
| ACM 808/BA/WH |
Istruzioni per l'uso
Whirlpool ACM 808/BA/WH Instruction for Use,
12 pagine
|
| BLVE 8100/PT |
Istruzioni per l'uso
Whirlpool BLVE 8100/PT Instruction for Use,
24 pagine
|
| AKZ 275 |
Istruzioni per l'uso
Whirlpool AKZ 230 Instruction for Use,
12 pagine
|
| ETK 5240 IN |
Istruzioni per l'uso
Whirlpool ETK 5240 IN Instruction for Use [fr] ,
2 pagine
|
| CI 6V E9 (W) R /HA |
Istruzioni per l'uso
Whirlpool CI 6V E9 (W) R /HA Instruction for Use,
68 pagine
|
| ELCK 8250 IN |
Istruzioni per l'uso
Whirlpool ELCK 8250 IN Instruction for Use,
18 pagine
|
| OS 89D IX /HA |
Istruzioni per l'uso
Whirlpool OS 89D IX /HA Instruction for Use,
76 pagine
|
| OS 992 C IX /HA |
Istruzioni per l'uso
Whirlpool OS 89 IX /HA Instruction for Use,
72 pagine
|
| FNG 36 (WH) |
Istruzioni per l'uso
Whirlpool FN 36 XA Instruction for Use,
64 pagine
|
| FK 83 X |
Istruzioni per l'uso
Whirlpool FK 83 X Instruction for Use,
68 pagine
|
| BC 99D C XA |
Istruzioni per l'uso
Whirlpool BC 99D C XA Instruction for Use,
72 pagine
|
© 2020, manymanuals.it. Tutti i diritti riservati | 0.037 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commenti su questo manuale